Clipper lighters are popular for their durability, eco-friendliness, and unique design. Unlike disposable lighters, Clipper lighters can be refilled with butane gas and have replaceable flints, making them a long-lasting option. If your Clipper lighter has run out of gas or the flint has worn down, don’t throw it away—just refill it!
In this guide, we’ll cover how to refill a Clipper lighter and how to replace the flint so you can keep using it indefinitely.
🔥 How to Refill the Butane Gas
Over time, your Clipper lighter will run out of fuel. Here’s how to refill it properly:
What You Need:
✔️ A can of high-quality butane gas (Clipper, Ronson, or Colibri recommended)
✔️ Your empty Clipper lighter
✔️ A flat surface to work on
Step-by-Step Refilling Instructions:
- Check if the lighter is empty – Shake the lighter near your ear. If you don’t hear any liquid inside, it’s time for a refill.
- Choose a well-ventilated area – Avoid refilling near open flames or heat sources.
- Turn the lighter upside down – The refill valve is located at the bottom.
- Insert the butane can nozzle into the refill valve – Make sure the nozzle fits securely.
- Press down firmly for 3-5 seconds – You may hear a slight hissing sound as the gas transfers. Avoid overfilling.
- Let the gas settle – Wait at least 2-3 minutes before using the lighter to allow the butane to stabilize.
- Test the lighter – If the flame is weak or inconsistent, try refilling again or adjusting the flame if your model allows it.
🛑 Safety Tips:
- Always refill in a well-ventilated area to prevent gas buildup.
- Use high-quality butane to avoid clogging the lighter’s system.
- Never shake the butane can before refilling—it can introduce air bubbles and cause malfunctioning.
- If the lighter isn’t working properly after refilling, purge any trapped air by pressing the refill valve with a small tool before adding more gas.
🔧 How to Replace the Flint in a Clipper Lighter
If your Clipper lighter isn’t sparking, it might be time to replace the flint. Thankfully, Clipper lighters have a removable flint system, making replacement easy.
What You Need:
✔️ A new Clipper flint (standard-sized Clipper flints work best)
✔️ Your Clipper lighter
Step-by-Step Flint Replacement:
- Remove the flint system – Pull out the metal tube that holds the striker wheel. It should come out easily.
- Unscrew the bottom cap – At the end of the metal tube, you’ll find a small cap that holds the flint. Unscrew it carefully.
- Remove the old flint – Tap the tube lightly to let the used flint fall out.
- Insert a new flint – Drop a fresh flint into the tube.
- Reassemble the flint system – Screw the cap back on and insert the flint system back into the lighter. Push until it clicks into place.
- Test the lighter – Spin the wheel a few times to ensure the flint sparks properly.
🔹 Pro Tip: Always keep spare flints on hand so you can replace them when needed!
🔄 Why Refill a Clipper Lighter Instead of Buying a New One?
♻️ Eco-Friendly – Reduces plastic waste compared to disposable lighters.
💰 Cost-Effective – A can of butane and a pack of flints cost less than repeatedly buying new lighters.
🛠 Durable & Reliable – Clippers are built to last with proper maintenance.
🔥 Unique Design – The removable flint system also works as a handy packing tool for smokers.
By refilling your Clipper lighter, you extend its life and save money while helping the environment. With just a few simple steps, you can keep your Clipper lighter working like new